Picture Name

Information Details


The second generation ultra-low nitrogen burner completes the operation test in Shuangliang Boiler Co., Ltd.

Release time:

2016-04-29 14:01

Lingyun Ruisheng is committed to the transformation of combustion technology, the latest second generation low nitrogen burner into the market.

2015Year10In January, the nitrogen oxide emissions developed in cooperation with the Beijing Energy Conservation Monitoring Center, a subsidiary of Beijing Jingneng Group, were lower30mg (15ppm) The first-generation metal fiber burner has completed the transformation of the old burner in the boiler room of Beijing Shenggujiayuan and put it into operation, as shown in the figure below.

 

 

The first-generation metal fiber burner uses a special combustion controller from Siemens Germany for combustion control. The premixer completes the mixing of gas and combustion-supporting air, and is equipped with an imported metal surface fiber combustion head to accurately control the air-combustion ratio. The purpose of high-efficiency and low-emission combustion is achieved.

 

 

(Beijing Shenggujiayuan boiler room and burner installation site photo)

 

Continuous improvement and the pursuit of excellence are the business strategy and market objectives that Lingyun Ruisheng has always adhered. After a short period of half a year, on the basis of the first generation of low nitrogen burner, we have developed a second generation of ultra-low nitrogen burner with a leading level.

The new second-generation product belongs to the fully premixed metal surface burner. It has been improved in many places such as the key air inlet system, premixed device, ignition and fire detection system. It not only has better stable operation performance, but also has beautiful appearance and easy operation. It can automatically adjust the power according to the boiler output requirements.

2016Year4Month27DayThe latest second-generation low-nitrogen burner of Haomade completed the operation test in Shuangliang Boiler Co., Ltd.

After the actual full load operation test on the supporting boiler, the oxygen content is lower7%the case of flue gas emissionNOxBelow26mg/Nm3The energy efficiency of the burner meets the requirements..

 

 

 

 

(Photo of boiler operation test laboratory and burner installation and use site of Shuangliang Boiler Co., Ltd.)

Keywords: Combustion equipment